Bikestore

Specification

  • Apex roof bike store
  • Suitable for 2 – 3 bikes
  • Tongue & groove shiplap, including roof and floor
  • Braced and framed double doors
  • Can be used for general storage
  • Fits a padlock to the slide bolt to secure

Size Code: Estimate size in feet, for example 703 = approximately 7ft x 3ft.

Size FW x D x H: Front Width x Depth (front to back) x Height (top of the apex) in m (metres). Non-standard sizes are also obtainable.

Door W x H: Width x Height of door in mm (millimetres). Please note the door gap is smaller than the door itself.

Floor Plan: Select by size from the above table. These show the proportions of the floor along with the joins and direction of the floor joists. Please note, that the direction of the floor joists can change so these must be checked before ordered if critical.

Assembly Guides: Select by size from the table above. Please note that due to the number of sizes, models and variations which we offer, the assembly guide may not be 100% specific to your building, but should provide you with all the necessary principles.

Eaves Height: Internal height at the stunted point of the roof (sides).

Lock: This timber building also comes with a slide bolt which is suitable for fitting a padlock if needed.

Roof cover: Supplied with high quality polyester-based felt roofing.

 

Building Sizes
All sizes are an estimate and are based on the external measurements (unless stated contrarily) – they also do not encompass roof overhang. Please allow for any overhangs when choosing the size of your timber building, whilst also bearing in mind, the recommended space for installations and upkeep of your timber building. We advise you also check internal sizes when buying a timber building for a specific purpose, or any other sizes if critical. Planning permission may also be needed on some buildings depending on size and location, please check with your local council if unsure.