• Small, apex roof playhouse
  • Tongue & groove shiplap
  • Rounded upright framing
  • 300mm verandah (included in overall size)
  • Part-glazed door with decorative handle
  • Piano style continuous hinge and magnetic catch
  • One front window and one side window
  • A side window can be fitted on either side of the playhouse
  • Perspex glazing throughout

Size Code: Estimate size in feet, for example 505 = approximately 5ft x 5ft.

Size FW x D x H: Front Width (door positioning) x Depth (front to back) x Height (top of the apex) in m (metres).

Door W x H: Width x Height of the door in mm (millimetres). Please note, that the door gap is moderately smaller than the door itself.

Floor Plan: Select by size from the above table. These show the diameter of the floor along with the joins and direction of the floor joists. Please note, that the direction of the floor joists can change so this must be checked before an order is placed, if critical.

Assembly Guides: Select by size from the above table. Please note that due to the quantity of sizes, models and variations that we offer, the assembly guide may not be 100% specific to your playhouse, but should provide you with all the necessary principles.

Eaves Height: Internal height at the stunted point of the roof (sides).

Lock: This playhouse does not have a lock for safety reasons.

Roof cover: Supplied with high quality polyester-based felt roofing.


Building Sizes
All sizes are an estimate and are based on the external measurements (unless stated contrarily) – they also do not encompass roof overhang. Please allow for any overhangs when choosing the size of your timber building, whilst also bearing in mind, the recommended space for installations and upkeep of your timber building. We advise you also check internal sizes when buying a timber building for a specific purpose, or any other sizes if critical. Planning permission may also be needed on some buildings depending on size and location, please check with your local council if unsure.