Suffolk
Specification
- Popular pent roof shed
- Tongue & groove shiplap, including roof and floor
- Fully framed and three-hinged brace door
- Glass windows
- Available in numerous configurations
Size Code: Approximate size in feet, for example 806 = approximately 8ft x 6ft.
Size FW x D x H: The Front Width (normally the long side) x Depth (the sloping ends) x Height (to the top of the roof) in metres. Non-standard sizes are available.
Windows: Width x Height of the door in mm (millimetres). Please note, the door gap is slightly smaller than the door itself.
Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.
Floor Plan: Select by designated size from the table. These show the magnitude of the floor along with joins and direction of floor joists. Please note, that the direction of the floor joists can change so this must be checked before an order is placed if condemned.
Assembly Guides: Choose by size from the table, and please note that due to the number of sizes, models and modifications we offer, the assembly guide may not be 100% specified to your timber building, but should be provided with all the necessary principles.
Eaves Height: Internal height at stunted point of the roof (offset apex so lower at the back and higher at the front).
Lock: This timber building comes with a hasp and staple which is suitable for fitting padlocks if longed for.
Roof cover: Supplied with high-quality polyester-based felt roofing.
