Hen House

Category:

Specification

  • Hen house with apex roof
  • Tongue and groove shiplap
  • Raised enclosure (est. 720mm deep internal) with access door and sliding hatch
  • Floor level run area (no floor) with chicken wire sides
  • Run is 600mm longer on 804 model compared to the 604

Size Code: Estimate size in feet, for example 604 = approximately 6ft x 4ft.

Size L x W x H: Length x Width (door end) x Height (top of the apex) in m (metres).

Door W x H: Width x Height of the door in mm (millimetres). Please note, that the door gap is moderately smaller than the door itself.

Floor Plan: Select by size from the above table. These show the diameter of the floor along with the joins and the direction of the floor joists. Please note, that the direction of the floor joists can change so this must be checked before an order is placed, if critical.

Assembly Guides: Select by size from the above table. Please note that due to the quantity of sizes, models and variations we offer, the assembly guide may not be 100% specific to your hen house, but it should provide you with all the necessary principles.

Eaves Height: Internal height at the stunted point of the roof (sides).

Lock: This hen house comes with a tower bolt, which keeps the doors closed but does not lock them.

Roof cover: Supplied with high quality polyester-based felt roofing.

 

Building Sizes
All sizes are an estimate and are based on the external measurements (unless stated contrarily) – they also do not encompass roof overhang. Please allow for any overhangs when choosing the size of your timber building, whilst also bearing in mind, the recommended space for installations and upkeep of your timber building. We advise you also check internal sizes when buying a timber building for a specific purpose, or any other sizes if critical. Planning permission may also be needed on some buildings depending on size and location, please check with your local council if unsure.